4 Most Popular Homebrew Testosterone Recipes

4 Hot Testosterone Powders Homemade Recipes

What is Homebrew Testosterone?

Homebrewing testosterone refers to the process of turning raw testosterone powder into an injectable solution. Common esters used in homebrewing include:

• Testosterone Enanthate: A slow-release ester with a long half-life, popular in both TRT and bodybuilding cycles.
• Testosterone Cypionate: Another long-acting ester with a similar profile to enanthate but slightly shorter half-life.
• Testosterone Propionate: A fast-acting ester often used in cutting cycles due to its shorter half-life and quick release into the bloodstream.

Homebrewing allows users to customize their dosing, control the concentration of the product, and significantly reduce costs.

Tools and Ingredients for Homebrew Testosterone

To successfully homebrew testosterone, you will need a variety of tools and ingredients, which ensure the process is sterile and precise:

Ingredients:

1. Raw Testosterone Powder: This is the active anabolic steroid that you will be converting into a solution.
2. Carrier Oil: Oils like grapeseed oil, cottonseed oil, or sesame oil are commonly used to suspend the testosterone powder for injection.
3. Benzyl Alcohol (BA): A preservative that also acts as a solvent to keep the solution stable. It is used in low concentrations (1-3%).
4. Benzyl Benzoate (BB): This is another solvent that helps the testosterone powder dissolve properly in the carrier oil and reduces the likelihood of the solution crashing (forming crystals).
5. Sterile Vials: These will hold the final testosterone solution.
6. Sterile Syringes and Filters: Syringes will be used for measuring and transferring liquids, while syringe filters (0.22-micron filters) will help sterilize the solution before it is transferred into vials.

Tools:

1. Digital Scale: Accurate to 0.01g to measure the testosterone powder.
2. Beaker or Glass Flask: To mix and heat the solution.
3. Heating Source: A hot plate or water bath to help dissolve the powder and mix the ingredients.

Testosterone Homebrew Recipes

Here are basic recipes for the most commonly homebrewed testosterone esters: Testosterone Enanthate, Cypionate, and Propionate. Adjustments in carrier oil or solvents may be made based on preferences or specific needs.

Testosterone Enanthate Recipe (250mg/mL)

• Ingredients:
  • 10g Testosterone Enanthate powder
  • 18.8mL Benzyl Benzoate (15% of total solution)
  • 2mL Benzyl Alcohol (2% of total solution)
  • 80mL Grapeseed Oil (or another sterile carrier oil)
• Steps:
  1. Weigh the testosterone powder: Using a digital scale, measure 10g of testosterone enanthate powder.
  2. Mix powder with solvents: In a beaker, add the testosterone powder, benzyl alcohol (BA), and benzyl benzoate (BB).
  3. Heat the mixture: Place the beaker in a warm water bath or on a hot plate, gently heating the mixture to help the powder dissolve.
  4. Add carrier oil: Once the powder is fully dissolved, add the pre-warmed grapeseed oil to the solution and mix thoroughly.
  5. Sterilize the solution: Use a 0.22-micron syringe filter to filter the solution into a sterile vial.
  6. Store the final product: Once the solution is filtered and stored in a sterile vial, it is ready for use.

Testosterone Cypionate Recipe (200mg/mL)

• Ingredients:
  • 10g Testosterone Cypionate powder
  • 20mL Benzyl Benzoate (20% of total solution)
  • 2mL Benzyl Alcohol (2% of total solution)
  • 78mL Cottonseed Oil (or another sterile carrier oil)
• Steps:
  1. Weigh the testosterone cypionate powder.
  2. Mix with solvents: Add benzyl alcohol and benzyl benzoate to the powder and heat gently until the powder dissolves.
  3. Add oil: Slowly introduce the warmed cottonseed oil to the mixture and stir.
  4. Filter and store: Use a syringe filter to sterilize the solution before transferring it to a sterile vial.

Testosterone Propionate Recipe (100mg/mL)

• Ingredients:
  • 10g Testosterone Propionate powder
  • 20mL Benzyl Benzoate (20% of total solution)
  • 2mL Benzyl Alcohol (2% of total solution)
  • 78mL Sesame Oil
• Steps:
  1. Weigh the testosterone propionate powder.
  2. Mix solvents: Heat and dissolve the powder with benzyl alcohol and benzyl benzoate.
  3. Add oil: Introduce the sesame oil and stir until well-mixed.
  4. Sterilize: Filter the mixture using a syringe filter into a sterile vial.

Safety Considerations When Homebrewing Testosterone

1. Sterility: Always prioritize sterility when handling raw powders and mixing solutions. A lack of sterility can result in infections, abscesses, and other complications. Always sterilize equipment and use proper filtering techniques.
2. Dosage Accuracy: Precise measurements are critical. Inaccurate dosing can lead to incorrect testosterone levels, resulting in hormone imbalances and side effects.
3. Quality of Raw Powder: Sourcing high-quality raw testosterone powder from a reputable supplier is essential. Impurities or low-quality products can lead to suboptimal results and health risks.
4. Proper Storage: Store your final product in a cool, dark place, and ensure that it is properly sealed to prevent contamination.

How to convert Testosterone steroid powder into injectable form?

Take the recipe for Testosterone enanthate 250mg/mL 100mL for example. This is a very simple conversion method. The better you sterilize when switching steroids, the less likely you are to develop a bacterial abscess.

Common 250mg/mL Recipe for 100mL
25 grams Test enanthate powder (18.75mL)
2mL Benzyl alcohol (2%)
10mL Benzyl benzoate (10%)
69.25mL Grape seed oil

Tools

Syringes 3cc & 5/10cc
18 or 20 gauge needles
Whatman sterile filter
mixing Vial
Sterile Vial

Production Steps

Step 1: Weigh 25 grams of testosterone enanthate powder into the beaker;

Step 2: Add solvent: 69.25 ml grapeseed oil, 2 ml benzyl alcohol, and 10 ml benzyl benzoate to the beaker;

Step 3: Dissolve the testosterone enanthate powder into the solution with stirring;

Step 4: Use a saucepan slightly filled with water. Heat the solution until everything becomes clear;

Step 5: Observe from the bottom of the beaker to see a clear solution of testosterone enanthate;

Step 6: Attach a 22 gauge needle to the Whatman syringe filter;

Step 7: Sterilize the top of the 10 ml vial by wiping it with alcohol;

Step 8: Insert the 20-gauge syringe filter needle into the vial septum (rubber piece);

Step 9: Insert a second needle into the septum to release the pressure created when injecting the solution into the vial;

Step 10: aspirate the warm solution (warming the solution will speed up the filtration process and make it easier to filter);

Step 11: Connect the barrel of the syringe to the Whatman syringe filter and push the solution through the Whatman syringe filter into the sterile vial. Use constant pressure, make sure you don’t apply too much pressure or you will crack the syringe filter and get it everywhere.

Step 12: Get a pure Testosterone enanthate 250mg/ml liquid, labeled and ready to use.

Please note: The recipes provided above are for reference only!