Primo E Homebrew Recipe
Preparing an injectable solution of Methenolone Enanthate (Le Primobolan) de la poudre brute nécessite des procédures précises et stériles. Here is a step-by-step guide to help you prepare a high-quality injectable solution.
Méthénolone énanthate, commonly known as Primobolan, is a long-acting anabolic androgenic steroid (AAS). Dérivé de la dihydrotestostérone (DHT), it is used in medical settings and for performance enhancement in bodybuilding.
Matériaux nécessaires
- Méthénolone Enanthate Powder: 10 Grammes
- Alcool benzylique (BA): 2Ml (2% du volume total)
- Benzoate de benzyle (BB): 20Ml (20% du volume total)
- Huile de support: Huile de pépins de raisin, huile de coton, ou huile MCT pour constituer le volume total de 100ml
- Béchers
- Sterile Vials
- Sterile Syringe Filters (0.22-Filtre à microns recommandé)
- Sterile Syringes and Needles
- Alcohol Pads
- Heating Plate or Water Bath
- Glass Stirring Rod or Magnetic Stirrer
- Protective Gloves and Sterile Workspace
Steps for Conversion
- Weigh 10 grams of Methenolone Poudre d’énanthate à l’aide d’une balance numérique.
- Place the measured powder into a beaker.
- Ajouter 2 ml d’alcool benzylique (BA) et 20ml de benzoate de benzyle (BB) vers le bécher.
- Stir the mixture until the Primo-E powder is completely dissolved. Vous pouvez utiliser un agitateur en verre ou un agitateur magnétique. Apply gentle heat if needed to aid in the dissolving process, but avoid overheating to prevent the steroid from degrading.
- Slowly add the carrier oil to the mixture while stirring until the total volume reaches 100ml.
- Draw the solution into a large sterile syringe and attach a 0.22-micron sterile syringe filter. Filter the solution into a new sterile vial to remove any particles and ensure sterility.
- Wipe the outside of the new sterile vial with an alcohol pad and transfer the filtered solution into the vial.
- Cap the vial with a sterile cap and store it in a cool, endroit sombre pour maintenir la stabilité.
Conseils clés:
1. Maintenir la stérilité: It is essential to maintain a sterile environment and equipment to prevent contamination.
2. Utilisez des mesures précises: Precision is vital for both the effectiveness and safety of the solution.
3. Contrôle de la chaleur: Employ gentle heat when necessary, and avoid excessive heat to prevent degradation of the Methenolone Enanthate.
Considérations de sécurité:
1. Équipement de protection: Always use gloves and protective clothing to avoid direct contact with the chemicals.
2. Ventilation: Work in a well-ventilated area to prevent inhaling fumes from solvents.
3. Disposition: Properly dispose of any waste materials according to local regulations for hazardous materials.
Methenolone Enanthate Powder for Sale
Methenolone Enanthate Conversion Recipes for 75, 100, 200mg/ml.
75mg/ml @ 300ml Methenolone Enanthate Recipe
- 22.5g primo enanthate powder (16.875Ml)
- 15ml d’alcool benzylique = 5%
- 45ml benzoate de benzyle = 15%
- 223.125ml Huile de pépins de raisin
100mg/ml @ 40ml Primobolan Depot Recipe
- 4g methenolone enanthate powder
- 2ml d’alcool benzylique = 5%
- 6ml benzoate de benzyle = 15%
- 29 ml Huile de pépins de raisin
100mg/ml @ 250ml Primo E Recipe
- 25g primobolan enanthate powder (18.75Ml)
- 5ml d’alcool benzylique = 2%
- 50ml benzoate de benzyle = 20%
- 176.25 ml Huile de pépins de raisin
200mg/ml @ 25ml Primo Enanthate Recipe
- 5g methenolone enanthate raw powder (3.75Ml)
- 1.25ml d’alcool benzylique = 5%
- 3.75ml benzoate de benzyle = 15%
- 16.25 ml Huile de pépins de raisin
200mg/ml @ 50ml Methenolone Enanthate comversion Recipe
- 10g Primobolan E Powder (7.5Ml)
- 1ml Alcool benzylique (2%)
- 7.5ml de benzoate de benzyle (15%)
- 17ml Huile de pépins de raisin
- 17ml Ethyl Oleate
200mg/ml @ 250ml Primobolan Depot Conversion Recipe
- 50g Methenolone E powder (37.5Ml)
- 5ml d’alcool benzylique = 2%
- 50ml benzoate de benzyle = 20%
- 157.5 ml Huile de pépins de raisin
Références
