Methenolon Enanthate w proszku Homebrew Przepis

Primo E Homebrew Recipe

Preparing an injectable solution of Methenolone Enanthate (Primobolan (Prymobolan)) z surowego proszku wymaga precyzyjnych i sterylnych procedur. Here is a step-by-step guide to help you prepare a high-quality injectable solution.

Methenolon Enanthate, commonly known as Primobolan, is a long-acting anabolic androgenic steroid (AAS). Pochodzi z dihydrotestosteronu (Protokół DHT), it is used in medical settings and for performance enhancement in bodybuilding.

Potrzebne materiały

• Methenolon Enanthate Powder: 10 Gramów
• Alkohol benzylowy (BA): 2Ml (2% całkowitej objętości)
• Benzoesan benzylu (BB): 20Ml (20% całkowitej objętości)
• Olej nośnikowy: Olej z pestek winogron, olej z nasion bawełny, lub olej MCT o łącznej objętości 100 ml
• Zlewki
• Sterylne fiolki
• Sterylne filtry strzykawkowe (0.22-Zalecany filtr mikronowy)
• Sterylne strzykawki i igły
• Wkładki nasączone alkoholem
• Płyta grzewcza lub łaźnia wodna
• Szklany pręt mieszający lub mieszadło magnetyczne
• Rękawice ochronne i sterylne miejsce pracy

Kroki do konwersji

1. Ważyć 10 grams of Methenolone Enanthate w proszku za pomocą wagi cyfrowej.
2. Place the measured powder into a beaker.
3. Dodaj 2 ml alkoholu benzylowego (BA) i 20 ml benzoesanu benzylu (BB) do zlewki.
4. Stir the mixture until the Primo-E powder is completely dissolved. You can use a glass stirring rod or a magnetic stirrer. Apply gentle heat if needed to aid in the dissolving process, but avoid overheating to prevent the steroid from degrading.
5. Slowly add the carrier oil to the mixture while stirring until the total volume reaches 100ml.
6. Draw the solution into a large sterile syringe and attach a 0.22-micron sterile syringe filter. Filter the solution into a new sterile vial to remove any particles and ensure sterility.
7. Wipe the outside of the new sterile vial with an alcohol pad and transfer the filtered solution into the vial.
8. Cap the vial with a sterile cap and store it in a cool, dark place to maintain stability.

Key Tips:

1. Utrzymuj sterylność: It is essential to maintain a sterile environment and equipment to prevent contamination.
2. Korzystaj z dokładnych pomiarów: Precision is vital for both the effectiveness and safety of the solution.
3. Kontrola ciepła: Employ gentle heat when necessary, and avoid excessive heat to prevent degradation of the Methenolone Enanthate.

Względy bezpieczeństwa:

1. Sprzęt ochronny: Always use gloves and protective clothing to avoid direct contact with the chemicals.
2. Wentylacja: Work in a well-ventilated area to prevent inhaling fumes from solvents.
3. Dyspozycji: Properly dispose of any waste materials according to local regulations for hazardous materials.

Methenolone Enanthate Powder for Sale

Methenolone Enanthate Conversion Recipes for 75, 100, 200mg/ml.

75mg/ml @ 300ml Methenolone Enanthate Recipe

• 22.5g primo enanthate powder (16.875Ml)
• 15ml Alkohol benzylowy = 5%
• 45ml Benzoesan benzylu = 15%
• 223.125ml oleju z pestek winogron

100mg/ml @ 40ml Primobolan Depot Recipe

• 4g methenolone enanthate powder
• 2ml Alkohol benzylowy = 5%
• 6ml Benzoesan benzylu = 15%
• 29 ml oleju z pestek winogron

100mg/ml @ 250ml Primo E Recipe

• 25g primobolan enanthate powder (18.75Ml)
• 5ml Alkohol benzylowy = 2%
• 50ml Benzoesan benzylu = 20%
• 176.25 ml oleju z pestek winogron

200mg/ml @ 25ml Primo Enanthate Recipe

• 5g methenolone enanthate raw powder (3.75Ml)
• 1.25ml Alkohol benzylowy = 5%
• 3.75ml Benzoesan benzylu = 15%
• 16.25 ml oleju z pestek winogron

200mg/ml @ 50ml Methenolone Enanthate comversion Recipe

• 10g Primobolan E Powder (7.5Ml)
• 1ml alkoholu benzylowego (2%)
• 7.5ml benzoesanu benzylu (15%)
• 17ml oleju z pestek winogron
• 17ml Oleinian etylu

200mg/ml @ 250ml Primobolan Depot Conversion Recipe

• 50g Methenolone E powder (37.5Ml)
• 5ml Alkohol benzylowy = 2%
• 50ml Benzoesan benzylu = 20%
• 157.5 ml oleju z pestek winogron

Odwołania

• Homebrew Steroids Forums
• Pharmaceutical Compounding Resources